Kia Forte: Rear Console Cover Replacement - Floor Console - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Console Cover Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Loosen the rear console cover mounting screws (A).

3.
After loosening the mounting screws, then remove the rear console cover (A).

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Console Cover Component Location
1. Rear console cover ...

Console Armrest Component Location
1. Console armrest ...

See also:

Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor' ...

Heated Oxygen Sensor (HO2S) Circuit Diagram
(M/T) (A/T) ...

SS-A Solenoid Valve(ON/OFF) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Copyright www.kifomanual.com 2014-2026