Kia Forte: Rear Glass Defogger Switch Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Rear Glass Defogger / Rear Glass Defogger Switch Inspection
| 1. |
The rear glass defogger switch inputs can be checked using the
GDS.
|
| 2. |
To check the input value of rear glass defogger switch, select
option "Body Control Module".
|
| 3. |
To consult the present input/output value of BCM, "Current DATA".
It provides information of BCM input/output conditions of smart junction
box.
|
| 4. |
To check the input value of rear glass defogger switch in force
mode, select option "Actuation Test of smart junction box".
|
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure on th ...
Rear Glass Defogger Switch Replacement
1.
Remove the center fascia panel.
(Refer to Body - "Center Fascia Panel")
2.
Remove the cluster fascia panel.
(Refer ...
See also:
Oil Cooler Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and
then install it on a pressure tester.
2.
...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position f ...
Fuel Pump Motor Removal
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel
sender conn ...
Copyright © www.kifomanual.com 2014-2025