Kia Forte: Rear Seat Belt Retractor Replacement - Rear Seat Belt - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Seat Belt Retractor Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Retractor Replacement

(4Door, 2Door)
  
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
2.
After loosening the mounting bolt, then remove the rear seat belt retractor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
(5Door)
  
When installing the belt, make sure not to damage the retractor.
1.
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim")
2.
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
After loosening the mounting bolt, then remove the rear seat belt retractor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Seat Belt Retractor Component Location
(4Door, 2Door) 1. Rear seat belt retractor (5Door) 1. Rear seat belt retractor ...

Rear Center Seat Belt Retractor Component Location
(4Door) 1. Rear center seat belt retractor (5Door) 1. Rear center seat belt retractor ...

See also:

Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm.    ...

Output Speed Sensor Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Mode Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...

Copyright © www.kifomanual.com 2014-2024