Kia Forte: Rear Wheel Guard Replacement - Body Side Moulding - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Wheel Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and screws, then remove the rear wheel guard (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Front Wheel Guard Replacement
   • Put on gloves to protect your hands. &n ...

Front Mud Guard Replacement
   • Put on gloves to protect your hands. &nb ...

See also:

Cylinder Block Installation
1. Assemble the other parts in the reverse order of disassembly.    In case the cylinder b ...

Antenna Inspection
Glass Antenna Test 1. Wrap aluminum foil (A) around the tip of the tester probe (B) as shown. 2. Touch one tester probe to the ...

SS-A Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(Ω ...

Copyright © www.kifomanual.com 2014-2025