Kia Forte: Replacement
| 1. |
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
|
| 2. |
Disconnect the nozzle hose (B).
|
| 3. |
Detach the clips, then remove the cowl top cover (A).
|
| 4. |
Install in the reverse order of removal.
|
Component Location
Floor ConsoleTroubleshooting
Trouble Symptom
Probable cause
Remedy
Vehicle pulls to one side
Scoring of driveshaft ball joint
Replace
Wear, rattle or scoring of wheel b ...
Installation
•
Install the concentric slave cylinder bolts. Not to be
bent or twisted, Tighten them ...
Installation
1.
Install in the reverse order of removal.
2.
Adjust the ignition lock switch.
(1)
In state of full stro ...