Kia Forte: Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
|
3. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
|
4. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
|
|
5. |
Remove the luggage covering mat (A).
|
|
6. |
After loosening the mounting screws and clips, then remove the
rear partition trim (B).
|
|
7. |
Using a screwdriver or remover, remove the rear wheel house trim
(C).
|
|
8. |
Using a clip remover, detach the clips, and remove the rear transverse
trim (D).
|
|
9. |
After loosening the mounting screws, then remove the luggage side
trim (E).
|
|
10. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
[Folding Seat Type]
1. Luggage covering mat
|
2. Rear partition trim
|
[Fixed Seat Type]
2. Rear partition trim
3. Rear wheel house trim [LH]
4. Rear wheel house trim [RH]
5. Rear transverse trim
|
6. Luggage side trim [LH]
7. Luggage side trim [RH]
8. Rear Package Tray Trim
|
|
(2Door)
[Tray option type]
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the luggage tray covering trim (A).
|
|
2. |
After loosening the mounting screws, then remove the luggage tray
center trim (B).
|
|
3. |
After loosening the mounting screws and clips, then remove the
partition side trim (C).
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
1. Luggage tray covering trim
2. Luggage tray center trim
|
3. Partition side trim
|
|
[General Type]
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly.")
|
|
3. |
Remove the rear inner outer trim.
(Refer to Interior Trim - " Center Pillar Trim")
|
|
4. |
After loosening the mounting screws and clips, then remove the
rear partition trim (A).
|
|
5. |
Remove the luggage covering mat (B).
|
|
6. |
Using a clip remover, detach the clips, and remove the rear transverse
trim (C).
|
|
7. |
After loosening the mounting screws, then remove the luggage side
trim (D).
|
|
8. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
1. Rear partition trim
2. Luggage covering mat
3. Rear transverse trim
|
4. Luggage side trim [LH]
5. Luggage side trim [RH]
6. Rear pckage tray trim
|
|
(5Door)
[Tray option type]
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the luggage tray covering trim (A).
|
|
2. |
Remove the luggage center tray trim (B).
|
|
3. |
After loosening the mounting screws, then remove the luggage tray
side trim (C).
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
1. Luggage tray covering trim
2. Luggage center tray trim
|
3. Luggage tray side trim
|
|
[General Type]
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
|
3. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
|
4. |
After loosening the mounting bolts, then remove the rear shelf
side trim (A).
|
|
5. |
After loosening the mounting screw, then remove the rear wheel
house trim (B).
|
|
6. |
After loosening the mounting bolts, then remove the rear pillar
trim (C).
|
|
7. |
Remove the luggage covering trim (D).
|
|
8. |
Remove the clips, and then remove the rear transverse trim (E).
|
|
9. |
After loosening the mounting clips and screw, then remove the
luggage side trim (F).
|
|
10. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
1. Rear shelf side trim [LH]
2. Rear shelf side trim [RH]
3. Rear wheel house trim [LH]
4. Rear wheel house trim [RH]
5. Rear pillar trim [LH]
|
6. Rear pillar trim [RH]
7. Luggage covering trim
8. Rear transverse trim
9. Luggage side trim [LH]
10. Luggage side trim [RH]
|
11. Covering shelf trim
12. Fire extinguisher
13. Rear seat belt bracket [LH]
14. Rear seat belt bracket [RH]
|
|
Trunk Trim
Windshield Glass