1. |
Uplift the vehicle with lift.
|
2. |
Drain the manual transaxle oil after loosening the drain plug
(A).
|
3. |
Install the drain plug with new gasket.
|
4. |
Loosen the oil filler plug (A).
|
5. |
Add new oil through the filler plug hole and, fill it just below
the plug opening.
|
6. |
Install the oil filler plug.
|
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~
0.08in), conform to below.
1.
Disconnect the s ...
Room Lamp Inspection
Room Lamp
1.
Check that the switch operates properly after disconnecting the
room lamp connector (A).
...
Interior
Interior A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Interior B
* These dimens ...