Kia Forte: Shift Cable Adjustment - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Shift Cable Adjustment

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Adjustment

1.
Place the shift lever in the interior, and the transmission manual control lever, to the N position.
2.
Connect the shift lever (B) in the interior with the shift cable (A).

3.
Lightly push the shift cable towards "F" to tighten the cable.
4.
Tighten the nut (A) to the specified torque.

Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.8 lb-ft)

Shift Cable Installation
1. Install in the reverse order of removal.    • ...

Driveshaft and axle
...

See also:

TPMS Sensor
1. Storage State Sensors are in this state when they first arrive at dealership. This state is entered by LF request/command only. Either LF request ...

General
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

Engine And Transaxle Assembly Installation
Installation is in the reverse order of removal. Perform the following : • Adjust shift cable. • Adjust throttle cable. ...

Copyright � www.kifomanual.com 2014-2026