Kia Forte: Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / AVN System / Specifications
AVN Head Unit
| Item |
Specification |
|
| Power supply |
DC 14.4V negative ground |
|
| Load Impedance |
4ohm × 4 |
|
| Tuning type |
PLL SYNTHESIZED TUNING |
|
| Antenna |
80PF 75ohm |
|
| Dark current |
Max. 2.0mA (Head unit only) |
|
| Frequency range / Channel space |
FM |
87.5~107.9 MHz / 200 kHz |
| AM |
530~1,710 kHz / 10 kHz |
|
| S/N |
FM |
Min. 50 dB |
| AM |
Min. 40 dB |
|
Speaker
| Item |
Specification |
|
| Input Power |
Front |
20W (Max 40W) |
| Rear |
20W (Max 40W) |
|
| Front Tweeter |
20W (Max 40W) |
|
| Speaker Impedance |
Front |
4 ± 0.6 Ω |
| Rear |
4 ± 0.6 Ω |
|
| Front Tweeter |
3.4 ± 0.5 Ω |
|
| Speaker Number |
6 |
|
AVN System
...
Components Location
1. AVN (A/V & Navigation head unit)
2. Tweeter speaker
3. Glass antenna amp (Radio)
4. Front door speaker
5. Rear door speaker
6. Antenna feeder cable jiont
7. Ant ...
See also:
Front Stabilizer Bar Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Accelerator Position Sensor (APS) Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...
Accelerator Position Sensor (APS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
Copyright © www.kifomanual.com 2014-2025