Kia Forte: Specifications - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Specifications

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
Pressure [kPa (kgf/cm², in H2O)]
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5

Canister Close Valve (CCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)]

Emission Control System
...

Tightening Torques
Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.2 ~ 0.3 1.96 ~ 2.94 1.45 ~ 2.17 Canister install ...

See also:

Start/Stop Button Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center garnish [LH] (A). ...

Cooling Fan Circuit Diagram
...

General Inspection
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Copyright © www.kifomanual.com 2014-2025