Kia Forte: Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Ignition Lock Switch / Specifications
| Item |
Specifications |
| Working voltage |
DC 12V |
| Operating force |
9.8 ± 2.9N (1.0 ± 0.3kg, 7.2 ± 0.7lb) |
| Working temperature |
-40°C ~ 80°C (-40°F ~ 176°F) |
Description
•
Component location : Ignition
lock switch is connected to clutch pedal assembly.
•
Function
1.
Start is po ...
Inspection
Component Inspection
1.
Remove the ignition lock switch.
2.
Push the ignition lock switch in the direction of the arrow to
make sure t ...
See also:
Description
Limitations Of The Navigation system
GPS Signal Reception State
As the GPS satellite frequency is received/transmitted in straight lines,
reception may not work if hiding devices are pla ...
Input Speed Sensor Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - &qu ...
Rear Coil Spring Inspection
1.
Check the coil spring for crack and deformation.
2.
Check the coil spring pad for damage and deformation.
...
Copyright © www.kifomanual.com 2014-2025