Kia Forte: SS-B Solenoid Valve(ON/OFF) Description

Shift Solenoid(SS) Valve-B is attached to the valve body and is an on/off solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-B is installed at valve body.

SS-A Solenoid Valve(ON/OFF) Installation

1. Install in the reverse order of removal.    • ...

SS-B Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(Ω ...

See also:

Camshaft Position Sensor (CMPS) Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...

Components Operations
ECM (Engine Control Module) 1. The ECM(PCM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transponder ...

Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque: 21.6 ~ 31.4 N.m ...