These compartments can be used to store small items.
To avoid possible theft, do not leave valuables in the storage compartment. Always keep the storage compartment covers closed while driving.
WARNING - Flammable materials
Do not store flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods.
Center console storage (if equipped)
To open the center console storage, pull up the lever.
Glove box
To open the glove box, push the button (1) and the glove box will automatically open. Close the glove box after use.
Cool box (if equipped)
You can keep beverage cans or other items cool in the glove box.
1. Turn on the air conditioning.
2. Slide the open/close lever of the vent installed in the glove box to the open position.
3. When the cool box is not used, slide the lever to the closed position.
If some items in the cool box block the vent, the cooling effectiveness of the cool box is reduced.
✽ NOTICE
Do not put perishable food in the cool box because it may not maintain the necessary consistent temperature to keep the food fresh.
✽ NOTICE
If the temperature control knob is in the warm or hot position, warm or hot air will flow into the glove box.
Sunglass holder
To open the sunglass holder, press the cover and the holder will slowly open. Place your sunglasses with the lenses facing out.
To close the sunglass holder, push it up.
Do not place other items in the sunglass holder.
WARNING - Avoid distracted driving
Luggage tray (5 door, if equipped)
You can place a first aid kit, a reflector triangle, tools, etc. in the box for easy access.
Grasp the strap on the top of the cover and lift it.
Description
Component location : Manual transaxle
case
Operation principle : Vehicle Speed
Sensor (VSS) is hall sensor type and senses the rotating speed of differential
gear.
Function
...
Line Pressure Control Solenoid Valve Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Installation
1.
Install the multifunction switch.
2.
Install the clock spring.
3.
Install the steering column upper and lowe ...