Kia Forte: Under Body
| Projected Dimensions |
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
| Actual-Measurement Dimensions |
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Front side member tooling hole (Ø25) |
Side cover mounting hole (Ø8.6) |
Side cover mounting hole (Ø10.7) |
|
|
|
|
| Sub frame mounting bolt |
Sub frame mounting hole (Ø11) |
Center floor tooling hole (Ø8) |
|
|
|
|
| Front side member tooling hole (Ø13) |
Center floor side member tooling hole
(Ø7) |
Rear floor side member tooling hole (Ø10) |
|
|
|
|
| Rear floor side member tooling hole (Ø10) |
Rear floor side member tooling hole (Ø10) |
Rear floor center cross member tooling hole (Ø10) |
|
|
|
|
| Rear floor center cross member tooling hole (Ø10) |
Rear spring mounting hole (Ø9) |
Rear floor side member tooling hole (Ø8) |
|
|
||
| Rear floor side member tooling hole (Ø8) |
Rear Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Side outer p ...
Front Cross Member
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
...
See also:
CVVT Oil Control Valve (OCV) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
...
Power Seat Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Components Location
1. Battery sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/ DC Converter
5. ISG OFF Switch
6. Alternator
7. Starter
8. Brake switch
...
Copyright © www.kifomanual.com 2014-2025