Kia Forte: Audio Unit Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Audio / Audio Unit Installation

1.	Connect the audio unit connectors and cables.

2.	Install the audio unit.

3.	Install the center fascia panel.

4.	Install the center fascia garnish.

5.

Connect the negative (-) battery terminal.

Make sure the audio head unit connectors are plugged in properly and the antenna cable is connected properly.

Audio Unit Removal

• When prying with a flat-tip screwdriver, wrap it with protective tape, and apply pro ...

Speakers Inspection

1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

See also:

IMS Control Switch Inspection
1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

Description
Burglar Alarm State [B/A State] B/A State Description DISARM 1. In "DISARM" state, no vehicle start inhibition. So, whe ...

Outside lamp
4 Door, 2Door 1. Open the trunk lid. 2. Remove the service cover by pulling out the service cover. 5 Door 1. Turn off the engine. 2. Open the tailgate. 3. Loosen the light assembly retai ...

Categories

Copyright � www.kifomanual.com 2014-2026