1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the connector (A) of the blower motor.
|
3. |
Remove the blower motor (B) after loosening the mounting screws.
|
4. |
Install in the reverse order of removal.
|
Spark Plug Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Component Location
1. EMS box assembly
(Engine control relay, Fuel pump relay,
Air conditioner compressor relay)
2. C/Fan 1 relay
3. C/Fan 2 relay
4. SSB 4(IG2) relay
5. Blower relay
...