Kia Forte: Components
(1)
| 1. Main crash pad assembly 2. Crash pad side cover [LH] 3. Crash pad side cover [RH] |
4. Crash pad lower panel 5. Steering column shroud upper panel 6. Steering column shroud lower panel |
(2)
| 1. Main crash pad assembly 2. Side speaker grill [LH] 3. Side speaker grill [RH] 4. Photo sensor 5. A pillar rein (4Door) [LH] 6. A pillar rein (4Door) [RH] 7. Clock fascia panel 8. Clock assembly |
9. Cluster fascia panel 10. Drive airvent duct assembly 11. Crash pad lower switch 12. Crash pad lower panel 13. Cluster assembly 14. Center fascia panel 15. Audio assembly 16. Center garnish [LH] |
17. Heater control unit 18. Center airvent duct assembly [RH] 19. Crash pad upper panel 20. Glove box 21. Glove box housing 22. Side airvent duct assembly [RH] 23. Cowl cross bar assembly 24. Crash pad main wiring harness |
Crash Pad
...
Cluster Fascia Panel Component Location
1. Cluster fascia panel
...
See also:
Relay Box (Passenger Compartment) Fuse Inspection
1.
Be sure there is no play in the fuse holders, and that the fuses
are held securely.
2.
Are the fuse capacities for each circuit correct? ...
ESC Control Module Installation
1.
Install in the reverse order of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance ...
Copyright © www.kifomanual.com 2014-2025