Kia Forte: Concentric Slave Cylinder Assembly

Installation

1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

Component

1. Concentric slave cylinder assembly 2. Manual transaxle ...

See also:

Inpection
1. Measure a resistance of NTC and Heated pad. A. NTC resistance - 10.0 kΩ ± 10% (25°C) B. ...

Fuel Tank Pressure Sensor (FTPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat. (Refer to Body - “Rear Se ...

Removal
1. Separate the push rod (C) after remove the pin (A) and washer (B). 2. Remove the battery. (Refer to Engine Electrical S ...