1. |
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
|
2. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
High Mounted Stop Lamp Removal
[2 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly&qu ...
Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary.
Plain water may be used if washer fluid is not available.
However, use washer solvent with antifreeze characterist ...
If you have a flat tire (If equipped)
Jack and tools
The spare tire, jack, jack handle and wheel lug nut wrench are stored in the
luggage compartment.
Remove the luggage under tray out of the way to reach the equipment.
(1) Jack h ...