Kia Forte: Front Door Belt Inside Weatherstrip Replacement - Front Door - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Door Belt Inside Weatherstrip Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Inside Weatherstrip Replacement

1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A).
(4Door, 5Door)

(2Door)

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Front Door Latch Replacement
(4Door, 5Door, 2Door) 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Disconnect ...

Front Door Side Weatherstrip Replacement
(4Door, 5Door) 1. Loosen the front door checker (B) mounting bolt. Tightening torque: 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ...

See also:

CVVT Oil Control Valve (OCV) Circuit Diagram
(M/T) (A/T) ...

Engine Room Under Cover Removal and Installation
1. Remove the under cover front panel (A). 2. Remove the under covers (B). Tightening torque: 3.9 ~ 5.9 N ...

Crankshaft Position Sensor (CKPS) Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop ...

Copyright © www.kifomanual.com 2014-2025