|
|
1. |
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
|
2. |
Remove the sunroof glass.
(Refer to Sunroof - "Sunroof Glass")
|
3. |
After loosening the mounting bolts, then remove the assist handle
bracket (A).
|
4. |
Disconnect the drain tubes (B).
|
5. |
After loosening the mounding nuts, remove the sunroof assembly
(A).
|
6. |
Install in the reverse order of removal.
|
Specifications
Item
Specifications
Working voltage
DC 12V
Operating force
9.8 ± 2.9N
(1.0 ± 0.3kg, 7.2 ± 0.7lb)
Voltage drop
-0.4V
...
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
Alternator Specification
Alternator [Non-ISG type]
Item
Specification
Rated voltage
13.5V, 90A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC ...