1. |
Open the glass fully.
|
2. |
Remove the mounting pins (C), from the frame (B), and then remove
the deflector (A).
|
3. |
Install in the reverse order of removal.
|
Output Speed Sensor Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.1 ~ 1.55)
0.043 ~ 0.061
Output voltage
...
Front Strut Assembly Components
1. Strut assembly
2. Insulator
3. Strut bearing
4. Spring upper pad
5. Coil spring
6. Dust cover
7. Spring lower pad
...
Rear Torsion Beam Axle Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...