1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
|
2. |
After loosening the mounting screws, then remove the drip rail
assembly (A).
|
3. |
Remove the sunshade stopper (B).
|
4. |
Remove the sunshade assembly (A).
|
5. |
Install in the reverse order of removal.
|
Limp Home Function
1.
Limp Home By Tester
If the ECM detects the fault of the Immobilizer or transponder,
the ECM will allow limp home function of the immobilizer. Limp home
is o ...
Blower Motor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) of the blower motor.
3.
Remove ...
Room Lamp Installation
Room Lamp
1.
Reconnect the connector.
2.
Install the room lamp assembly.
3.
Install the lens.
...