|
|
1. |
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
|
2. |
Remove the sunroof glass.
(Refer to Sunroof - "Sunroof Glass")
|
3. |
After loosening the mounting bolts, then remove the assist handle
bracket (A).
|
4. |
Disconnect the drain tubes (B).
|
5. |
After loosening the mounding nuts, remove the sunroof assembly
(A).
|
6. |
Install in the reverse order of removal.
|
Auto Head Lamp Leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Sensor angle change.
3.
...
Front Cross Member
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
...