Kia Forte: Speakers Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Audio / Speakers Removal
Front Speaker
| 1. |
Remove the front door trim panel and speaker connector.
(Refer to Body - "Front Door Trim")
|
| 2. |
Remove the front speaker (A) after loosening 4 screws.
|
Rear Speaker
| [2 Door] |
| 1. |
Remove the rear door trim panel.
(Refer to Body - "Rear Door Trim")
|
| 2. |
Remove the rear speaker assembly (B) after disconnecting the connector
(A).
|
| 3. |
Remove the rear speaker (A) after loosening the mounting screws.
|
| [4/5 Door] |
| 1. |
Remove the rear door trim panel and speaker connector.
(Refer to Body - "Rear Door Trim")
|
| 2. |
Remove the rear speaker (A) after removing 4 screws.
|
Tweeter Speaker
| 1. |
Remove the tweeter speaker grille (A) from the crash pad.
|
| 2. |
Loosen the tweeter speaker mountig screws (2EA).
|
| 3. |
Remove the tweeter speaekr (B) after disconnecting the connector
(A).
|
Speakers Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
s ...
Speakers Installation
Front Speaker
1.
Install the front speaker.
2.
Install the front door trim.
Rear Speaker
1.
Install the ...
See also:
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross V ...
Engine Coolant Temperature Sensor (ECTS) Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
48.14
-20
-4
14.13 ~ 16.83
0
32
5.79
...
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance ...
Copyright © www.kifomanual.com 2014-2025