Kia Forte: Installation - BCM (Body Control Module) - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / BCM (Body Control Module) / Installation

1.
Install the BCM unit.
2.
Install the center lower cover.
3.
Install the floor console assembly.
4.
Install the heater & A/C control unit.
5.
Connect the negative (-) battery terminal.
Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C control unit. (Refer to Heating,Ventilation, Air Conditi ...

BCM Diagnosis With GDS
1. The body control module can diagnose by using the GDS more quickly. The BCM communicates with the GDS and then reads the input/output value and drives the ac ...

See also:

Special driving conditions
Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extra ...

Warning And Caution Labels
1. Fan caution 2. Radiator cap caution 3. Battery caution Battery Caution Label Warning / Caution Label (Cont'd) A. Keep lighted cigare ...

Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characterist ...

Copyright www.kifomanual.com 2014-2026