Kia Forte: Auto Head Lamp Leveling Unit Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Removal
| 1. |
Remove the head lamp leveling unit connector (A).
|
| 2. |
Remove the head lamp leveling unit (B) after loosening the mounting
bolts.
|
Auto Head Lamp Leveling Unit Inspection
1.
Ignition "ON".
2.
Turn on the head lamp switch.
3.
Check for operation. If the aim of the head lam ...
Auto Head Lamp Leveling Unit Installation
1.
Install the head lamp leveling unit.
2.
Reconnect the head lamp leveling unit connector.
...
See also:
Adjustment
Transaxle Control Module(TCM) Learning
When shift shock is occurred or parts related with the transaxle are replaced,
TCM learning should be performed.
In the following case, TC ...
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Purge Control Solenoid Valve (PCSV) Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
...
Copyright © www.kifomanual.com 2014-2025