Kia Forte: Purge Control Solenoid Valve (PCSV) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV) Specification
| Item |
Specification |
| Coil Resistance (Ω) |
22.0 ~ 26.0 [20°C(68°F)] |
Purge Control Solenoid Valve (PCSV) Description
Purge Control Solenoid Valve (PCSV) is installed on the intake manifold
and controls the evaporative purge between the canister and the intake manifold.
It is a normally closed solenoid valve ...
Purge Control Solenoid Valve (PCSV) Circuit Diagram
(M/T)
(A/T)
...
See also:
Seat Belt Switch Inspection
1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continu ...
Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Copyright © www.kifomanual.com 2014-2025