Kia Forte: Radiator Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Radiator Components
| 1. Radiator 2. Radiator upper mounting bracket 3. Lower mounting insulator 4. Radiator upper hose |
5. Filler neck assembly 6. Radiator lower hose 7. Clamp |
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...
Radiator Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and
then install it on a pressure tester.
2.
...
See also:
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed air.
1. Loosen the air c ...
Rear Coil Spring Inspection
1.
Check the coil spring for crack and deformation.
2.
Check the coil spring pad for damage and deformation.
...
Copyright © www.kifomanual.com 2014-2024