[LEV2 Type] |
1. |
Lift the vehicle.
|
2. |
Disconnect the vapor hose quick-connector (A) and ventilation
hose (B).
|
3. |
Remove the protector installation bolts (C) and then remove the
canister.
|
1. |
Lift the vehicle.
|
2. |
Disconnect the ventilation hose (A) from fuel tank air filter
|
3. |
Remove the protector installation bolt (A) and nuts (B), and then
remove the canister assembly.
|
4. |
Disconnect the ventilation hose (A) and vapor hose (B).
|
5. |
Remove the auxiliary canister & bracket assembly (C) after removing
a bolts and nuts.
|
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the vapor hose (A) and ventilation hose (B).
|
3. |
Remove the auxiliary canister (C) after removing the nuts (D).
|
Specification
Item
Specification
Type
Hall sensor
Working voltage
6.5 ~1 5V
Output voltage
VL ≤ 0.5 V
(When output cu ...
Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of
power, or hear loud pinging or knocking, the engine is probably too hot. If this
happens, you should: 1.Pull off the ro ...
Steering Column Shroud Panel Replacement
[Steering column shroud lower panel]
•
Put on gloves to protect your hands.
...