Kia Forte: Injector Specification - Engine Control System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Injector Specification

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Injector Specification

Item
Specification
Coil Resistance (Ω)
13.8 ~ 15.2 [20°C(68°F)]

Injector Description
Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by ...

Injector Circuit Diagram
(M/T) (A/T) ...

See also:

Cooling Fan Description
[Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...

Rear Seat Assembly Replacement
[Rear seat cushion assembly] 1. Disconnect the rear seat cushion heater connector (A) from the trunk inner side. 2. After loosening th ...

Copyright © www.kifomanual.com 2014-2025