Kia Forte: User Settings Mode - LCD display - Features of your vehicle - Kia Forte TD 2014-2018 Owners ManualKia Forte: User Settings Mode

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Owners Manual / Features of your vehicle / LCD display / User Settings Mode

Description

On this mode, you can change setting of the doors, lamps, and so on.


On this mode, you can change setting of the doors, lamps, and so on.

Door

Auto Door Lock (if equipped)

Off:

The auto door lock operation will be deactivated.

Speed:

All doors will be automatically locked when the vehicle speed exceeds 15km/h (9.3mph).

Shift Lever:

All doors will be automatically locked if the automatic transaxle shift lever is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position.

Auto Door Unlock (if equipped)

Off:

The auto door unlock operation will be canceled.

Key Out or Power Off:

All doors will be automatically unlocked when the ignition key is removed from ignition switch or Engine Start/Stop Button is set to the OFF position.

Shift Lever:

All doors will be automatically unlocked if the automatic transaxle shift lever is shifted to the P (Park) position.

Two Press Unlock (if equipped)

Off:

The two press unlock function will be deactivated. Therefore, all doors will unlock if the door is unlocked.

On:

The driver’s door will unlock if the door is unlocked. When the door is unlocked again within 4 seconds, all doors will unlock.

Horn Feedback (if equipped)

Off:

The Horn feedback operation will be deactivated.

On:

After locking the door by pressing the lock button on the transmitter, if you press the lock button again within 4 seconds, the warning sound will operate once to indicate that all doors are locked.

Lamp

Head Lamp Delay (if equipped)

If this item is checked, the headlamp delay and headlamp welcome function will be activated.

Welcome Light (if equipped)

If this item is checked, the welcome light function of the puddle lamp will be activated.

One Touch Turn Lamp (if equipped)

If this item is checked, the lane change signals will blink 3, 5 or 7 times when the turn signal lever is moved slightly.

Settings

Welcome Sound

If this item is checked, the welcome sound function will be activated.

Shift Indicator (if equipped)

If this item is checked, the shift indicator function will be activated. For more details, refer to "Instrument Cluster" in this chapter.

Seat Easy Access (if equipped)

If this item is checked, the driver’s seat will automatically move forward or rearward for the driver to enter or exit the vehicle comfortably.

AVG Fuel Eco Reset

Auto Reset:

The average fuel economy will reset automatically when refueling.

Manual Reset:

The average fuel economy will not reset automatically whenever refueling.

Service Interval

On this mode, you can activate the service interval function with mileage (mi.


On this mode, you can activate the service interval function with mileage (mi. or km) and period (months).

A/V Mode (if equipped)

This mode displays the state of the A/V system.


This mode displays the state of the A/V system.

Turn By Turn Mode (if equipped)

This mode displays the state of the navigation.


This mode displays the state of the navigation.

LCD Modes
Service Mode Service Interval Service in It calculates and displays when you need a scheduled maintenance service (mileage or days). If the remaining mileage or time reaches 900 mi. (1,50 ...

Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position ...

See also:

Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1.Pull off the ro ...

Oil Pump Unit (OPU) Removal
1. Remove the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - “Crash Pad”) ...

26 Brake Control Solenoid Valve(26/B_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Copyright © www.kifomanual.com 2014-2024