Kia Forte: Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the smart junction box.
(Refer to Body Electrical System - "Relay Box (Passenger Compartment)")
|
| 3. |
Disconnect the ignition lock switch connector (A).
|
| 4. |
Remove the ignition lock switch by loosening a nut (A).
|
Inspection
Component Inspection
1.
Remove the ignition lock switch.
2.
Push the ignition lock switch in the direction of the arrow to
make sure t ...
Installation
1.
Install in the reverse order of removal.
2.
Adjust the ignition lock switch.
(1)
In state of full stro ...
See also:
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Fuel Tank Pressure Sensor (FTPS) Specification
Pressure [kPa (kgf/cm², in H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5
...
Brake Booster Vacuum Pressure Sensor Removal
Brake Booster Vacuum Pressure Sensor can not be replaced separately
due to vacuum leak.
Therefore, the sensor mu ...
Copyright © www.kifomanual.com 2014-2025