Kia Forte: Inspection
| 1. |
Check the clutch release cylinder for fluid leakage.
|
| 2. |
Check the clutch release cylinder boot for damage.
|
Components
1. Union bolt
2. Gasket
3. Tube joint
4. Clutch tube
5. Valve plate
6. Valve spring
7. Bleeder screw
8. Release cylinder
9. Return spring
10. Piston
11. Bo ...
Removal
1.
Drain the brake fluid through the bleed plug (A).
•
...
See also:
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Temperature Control Actuator Description
The heater unit includes mode control actuator and temperature control
actuator.
The temperature control actuator is located at the heater unit. It regulates
the temperature by the proced ...
Valve Body Components Location
1. Pressure Controle Valve(PCV) adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & Reverse Brake(LR/B) pressure flow hole
6. Underdrive ...
Copyright © www.kifomanual.com 2014-2024