Kia Forte: Installation - Clutch Release Cylinder - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Release Cylinder / Installation

1.
Install in the reverse order of removal.
  
Apply the specified grease to the push rod end.

Specified grease: CASMOLY L9508
Quantity: 0.4 ~ 0.8 g

Removal
1. Drain the brake fluid through the bleed plug (A).    • ...

Adjustment
Clutch Release Cylinder Air Bleeding Procedure    • Use the specified fluid. Avoi ...

See also:

Rear Door Side Weatherstrip Replacement
(4Door, 5Door) 1. Loosen the rear door checker (B) mounting bolt. Tightening torque: 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m,12.3 ~ ...

Output Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Copyright © www.kifomanual.com 2014-2024