Kia Forte: SS-A Solenoid Valve(ON/OFF) Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: SS-A Solenoid Valve(ON/OFF) Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF) Installation

1.
Install in the reverse order of removal.
  
When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.

The gasket of the valve body gasket (A) use new one.

Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")
SS-A Solenoid Valve(ON/OFF) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

SS-B Solenoid Valve(ON/OFF) Description
Shift Solenoid(SS) Valve-B is attached to the valve body and is an on/off solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-B is installed at valve body. ...

See also:

Fuel Tank Pressure Sensor (FTPS) Circuit Diagram
(M/T) (A/T) ...

Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characterist ...

Start/Stop Button Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center garnish [LH] (A). ...

Copyright © www.kifomanual.com 2014-2024