Kia Forte: Shift Cable Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Shift Cable Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Installation

1.
Install in the reverse order of removal.
  
Install the cable after placing the shift lever and the transmission manual control lever in the N position.
Adjust the control cable.
Shift Cable Removal
1. Remove the floor console assembly. (Refer to Body - "Floor Consol") 2. Remove the air duct. 3. ...

Shift Cable Adjustment
1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...

See also:

26 Brake Control Solenoid Valve(26/B_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Antenna Coil Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel" ...

Rear Seat Latch Replacement
(4Door, 2Door)    • Put on gloves to protect your hands. ...

Copyright © www.kifomanual.com 2014-2024