1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
2. |
Attach a spring scale to the steering wheel. With the engine speed
900 ~ 1100rpm, pull the scale and read it as soon as the tires begin
to turn.
|
3. |
If the measured value exceeds standard value, inspect the power
steering gear box and MDPS system.
|
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
...
Trip A/B
Tripmeter (1)
The tripmeter is the total driving distance since the last tripmeter reset.
Distance range: 0.0 ~ 9999.9 mi. or km
To reset the tripmeter, press the RESET button (Type A : RESET, ...