Kia Forte: Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
before beginning work.
|
| 2. |
Remove the roof trim assembly.
(Refer to Body - "Roof trim assembly")
|
| 3. |
Disconnect the curtain airbag harness connector (A).
|
| 4. |
After loosening the mounting bolts remove the curtain airbag.
|
Components
...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Installation
1.
Install in the reverse order of removal.
If the oil seal on the transaxle case side is da ...
Manifold Absolute Pressure Sensor (MAPS) Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Head Lamps Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the
battery voltage above 9V.) ...
Copyright © www.kifomanual.com 2014-2025