1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the door scuff trim.
(Refer to Body - "Door scuff trim")
|
4. |
Remove the center pillar trim.
(Refer to Body - "Center pillar trim")
|
5. |
Remove the upper anchor bolt.
|
6. |
Loosen the seat belt pretensioner mounting bolts (B) and remove
the seat belt pretensioner.
|
7. |
Disconnect the seat belt pretensioner connector (A).
|
CVVT & Camshaft Inspection
Camshaft
1.
Inspect the cam lobes.
Using a micrometer, measure the cam lobe height.
If the cam lobe height is less than specification, replace the
camsh ...
IMS Power Seat Control Installation
-
Make sure that the IMS control switch connectors and related
connectors are plugged in ...
Tire Installation
1.
Apply tire soap or lubrication to the top and bottom tire beads.
2.
To fit the bottom bead, position the valve at the 5 o’clock posit ...