Kia Forte: Inspection

Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery (A) and ECM (B). ...

Installation

1. Install in the reverse order of removal.    A. ...

See also:

IMS Control Switch Inspection
1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

Installation
1. Install in the reverse order of removal. 2. Tighten the vacuum pump mounting bolts to the specified torque. ...

License Lamp Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the lens (A) after loosening the mounting screws. 3. ...