1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
Remove the front door belt inside weatherstrip (A).
(4Door, 5Door)
(2Door)
|
3. |
Remove the front door window glass mounting hole plug.
|
4. |
Carefully adjust the front door window glass (A) until you can
see the bolts, then loosen them. Separate the glass from the glass run
and carefully pull the glass out through the window slot.
(4Door, 5Door)
(2Door)
|
5. |
Install in the reverse order of removal.
|
Components
(4Door, 5Door)
1. Rear door inside handle cap
2. Rear door pull handle cap
3. Rear door trim
4. Rear door rear seal
5. Rear door panel
6. Rear door module
7. ...
Installation
Clutch cover and disc should be replaced as a set.
1.
Apply grease on a disc spline ...
Front Seat Cushion Cover Component Location
1. Front seat cushion cover
...