1. |
Ignition "OFF", connect GDS.
|
2. |
Ignition "ON" & Engine "OFF" select vehicle name and ESC system.
|
3. |
Perform G-sensor calibration using GDS.
|
Valve Body Installation
1.
Install in the reverse order of removal.
After replacement or reinstallation procedure of ...
IMS Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting work.
The support r ...