Kia Forte: Hands Free Switch Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Inspection
| 1. |
Check the hands free remote control switch for resistance between
terminals in each switch position.
|
|||
Hands Free Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Mod ...
See also:
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Variable Charge Motion Actuator (VCMA) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the VCMA connector (A).
...
Installation
1.
Install the boot (A).
2.
Install the clip to the clutch release fork.
3.
Apply to grease in location ...
Copyright © www.kifomanual.com 2014-2024