Kia Forte: Hood switch Description - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Hood switch Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Hood switch Description

The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety reasons.
Seat Belt Switch Installation
1. Install in the reverse of removal. ...

Hood switch Inspection
1. Disconnect the hood switch connector (A). 2. Check for continuity between terminals ...

See also:

Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Ins ...

Rear Center Seat Belt Retractor Replacement
(4Door)    • When installing the belt, make sure not to damage the retractor. ...

Specification
Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.75 ± 15% [20°C (68°F)] Secondary Coil Resis ...

Copyright © www.kifomanual.com 2014-2024