Kia Forte: Inpection - Heated Steering wheel - Steering wheel - Steering System - Kia Forte TD 2014-2018 Service ManualKia Forte: Inpection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Steering System / Steering wheel / Heated Steering wheel / Inpection

1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance - 10.0 kΩ ± 10% (25°C)
B.
Heated pad resistance - 1.88 Ω ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
B.
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
C.
At that time switch on, all measure point (1~8)

System Circuit Diagram
Terminal Function No. Function Wire color 1 GND Back 2 IG2 Red 3 Switch Signal White ...

Electric Power Steering
...

See also:

Power Seat Control Switch Inspection
1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

Front Cross Member
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Rear Shock Absorber Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

Copyright © www.kifomanual.com 2014-2024