Kia Forte: Instrument Cluster Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Indicators And Gauges / Instrument Cluster Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the cluster fascia panel.
(Refer to Body - "Cluster Fascia Panel")
|
| 3. |
Remove the cluster (A) from the housing after removing 4 screws.
|
| 4. |
Disconnect the cluster connecter (A) and then remove the cluster
(B).
|
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the cluster facia panel.
...
See also:
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignitio ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[UD/B]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
...
Purge Control Solenoid Valve (PCSV) Installation
•
Install the component with the specified torques.
•
...
Copyright © www.kifomanual.com 2014-2025