Kia Forte: Manifold Absolute Pressure Sensor (MAPS) Circuit Diagram

Manifold Absolute Pressure Sensor (MAPS) Specification

Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 101.3 (1.03, 14.7) 4.0 ...

Manifold Absolute Pressure Sensor (MAPS) Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Conditio ...

See also:

Alternator Removal
1. Disconnect the battery negative terminal. 2. Remove the drive belt. (Refer to Engine Mechanical System - "Drive Belt") ...

Piston and Connecting Rod Reassembly
   • Thoroughly clean all parts to be assembled. • ...

Head Lamps Inspection
1. Check-points upon head lamp failure (HID) (1) Check the battery voltage. (Low beam will be on when the battery voltage above 9V.) ...