(4Door, 5Door) |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
2. |
After loosening the mounting screws, then remove the rear door
inside handle (A).
|
3. |
Install in the reverse order of removal.
|
Variable Intake Solenoid (VIS) Valve Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake
manifold. The VIS valve controls the vacuum modulator which activates a valve
in the intake manifold. The ECM opens or ...
Component Location
1. EMS box assembly
(Engine control relay, Fuel pump relay,
Air conditioner compressor relay)
2. C/Fan 1 relay
3. C/Fan 2 relay
4. SSB 4(IG2) relay
5. Blower relay
...
Manifold Absolute Pressure Sensor (MAPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...