Kia Forte: Relay Box (Passenger Compartment) Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Passenger Compartment) Inspection
| 1. |
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
|
| 2. |
To diagnose the SJB function, select the vehicle model, BCM and
SJB.
|
| 3. |
To consult the present input/out value of SJB, "Current DATA".
It provides information of SJB input/output conditions.
|
| 4. |
To perform functional test on SJB outputs, select "Actuation Test"
|
Relay Box (Passenger Compartment) Fuse Inspection
1.
Be sure there is no play in the fuse holders, and that the fuses
are held securely.
2.
Are the fuse capacities for each circuit correct? ...
Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box (SJB)
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer ...
See also:
Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor' ...
Sub Frame Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Specification
Item
Specification
Type
Hall sensor
Working voltage
6.5 ~1 5V
Output voltage
VL ≤ 0.5 V
(When output cu ...
Copyright © www.kifomanual.com 2014-2025